Mixman98 Report post Posted October 17, 2021 Hello, I have a 2010 Escape Limited. Recently after hitting the brakes hard, the pedal needs to be pretty much pushed to the floor for any braking. At first, the brakes would be back to normal after a restart or the next day. It's been 4 days since the last time and they still go to the floor. I've been working on cars about 45 years so I'm no stranger to auto mechanics. I know the ABS Modules have been an issue on these vehicles. My question is, has there been a recall for these and if I change the module with a known good one from the same year/8th digit Vin, does the PCM need to be programmed for the new module? Share this post Link to post Share on other sites
Gramon55 Report post Posted August 6, 2022 I had that problem after I bought a used 2006 Explorer. It was not the ABS. It was the front end. For some reason, when the front end left bushing got damaged, it sent the wrong information to the ABS, making it stop working. In my Chevy Trailblazer, the ABS does not work at all, but the breaks work fine. I just don't get any "help" from the ABS. I would check the front right and left, and the sensors before replacing the ABS module. If you change it, even if you buy a used one, you will have to go to the dealer to reprogram it. They will lock you in a room and ask for your life savings to let you out. Share this post Link to post Share on other sites
