Todd Martin Report post Posted August 23, 2022 Just rebuilt the CD4E un my 2007 Escape took for a test drive around 45 wont shift and slips came home checked the fluid and it was a qt low. So then my wife drove it still doing the same thing. Plus when backing up she said almost did not want to go in reverse. Feeling very down and frustrated at this time. Looking for advice right now. Could it be that the solenoid is bad. Tempted to drain the fluid and replace it. Should be fairly easy to do. Hope i didnt do something wrong when I rebuilt it. Thanks. Share this post Link to post Share on other sites
Todd Martin Report post Posted August 24, 2022 Ok guys, do not want to come across as a jerk. But on all my posts I get several views but no response. What gives. People just don't have any answers or afraid to give out advice anymore. Thought that is what the forum is for. Share this post Link to post Share on other sites
Todd Martin Report post Posted September 8, 2022 Just replaced the solenoid on my 2007 Escape. drives good in town but if you get it up to around 45 to 50 mph it acts like it cuts out and has no pulling power. Came back checked the fluid level and is good. Just really at wits end right now. Only thing I can think of something did not get put back 100% correctly when I rebuilt it. Not looking forward to tearing it down again. When I took it apart to rebuild it only thing major I found was a broken forward clutch hub. Then was replaced with a new one. Of course all the clutches and etc where worn out to be expected. Just need some good advice right now. THANKS . Or if anybody knows somebody I could call and talk to about this let me know. Share this post Link to post Share on other sites
